34
43"/50"/55"/65" UHD LED 2160p Sharp Roku TV
Analog audio using the LINE OUT jack
When you connect an analog speaker system or soundbar to the LINE OUT jack, sound plays through the TV speakers and
the audio device.
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the LINE OUT jack on your TV and to the AUDIO IN jacks on the analog
speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
Note
Use the volume controls on the analog speaker system or soundbar to
control the volume.
Audio cable
Analog speaker system
Audio cable
connector
LINE OUT jack
On your TV
Soundbar
43"/50"/55" models
55" model shown
65" model
To Next Page
Loading...
Need help?
General