5
R-1405
R-1406
Electrical Requirements
The oven is equipped with a 3-prong grounding plug. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE
GROUNDING PIN FROM THE PLUG.
The power supply cord and plug must be connected to a separate 120 Volt AC, 60 Hz, 15 Amp. or more dedicated line, using
a grounded receptacle. The receptacle should be located inside the cabinet directly above the Microwave Oven/Hood system
mounting location.
1. Oven door with see-through window.
2. Door hinges.
3. Waveguide cover.
4. Turntable motor shaft.
5. Oven lamp.
It will light when oven is operating or door is open.
6. Door latches.
The oven will not operate unless the door is
securely closed.
7. One touch door open button.
8. Auto Touch control panel
9. Time display: Digital display, 99 minutes 99
seconds.
10.Ventilation openings.
11.Light Cover.
12.Grease filters.
13.Removable turntable.
The turntable will rotate clockwise or
counterclockwise.
Only remove for cleaning.
14.Removable turntable support.
15. Power supply cord
OVEN DIAGRAM
3-Pronged Plug
Grounded
Receptacle Box
Grounding Pin
3-Pronged Receptacle
14
7
3
4
5
10
2
1
6
11
12
15
9
8
13
10
10
To Next Page
Loading...
Need help?
General
