5
R-1480
R-1481
R-1482
Electrical Requirements
The oven is equipped with a 3-prong grounding plug. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE
GROUNDING PIN FROM THE PLUG.
The power supply cord and plug must be connected to a separate 120 Volt AC, 60 Hz, 15 Amp. or more branch circuit, using
a grounded receptacle. The receptacle should be located inside the cabinet directly above the Microwave Oven/Hood
system mounting location.
OVEN DIAGRAM
1. Oven door with see-through window.
2. Door hinges.
3. Stirrer cover.
4. Turntable motor shaft.
5. Oven lamp.
It will light when oven is operating or door is open.
6. Door latches.
The oven will not operate unless the door is securely closed.
7. Auto-Touch control panel.
8. Time display: Digital display, 99 minutes 99 seconds.
9. Ventilation openings.
10.Light Cover.
11.Grease filters.
12.Removable turntable.
The turntable will rotate clockwise or counterclockwise.
Only remove for cleaning.
13.Removable turntable support.
14. Power supply cord
10
11
12
8
7
14
6
9
3
4
5
1
9
13
2
3-Pronged Plug
Grounded
Receptacle Box
Grounding Pin
3-Pronged Receptacle
To Next Page
Loading...
Need help?
General
