107
MICROWAVE POWER LEVEL (cont)
COOKING TIPS:
In the cookbook section, you will find detailed instructions for recipe preparation, only basic cooking hints
are given here.
1. Pull the door opening handle, and the door will open, then place the food on the turntable.
2. If you wish to stop cooking before the cooking time has elapsed, turn the TIMER knob back to “0” (off),
or open the oven door. The oven door can be opened at any time during cooking. To continue cooking,
close the door. If you wish to change the power level or cooking time during cooking, press the
MICROWAVE POWER LEVEL button or turn the TIMER knob to the desired setting.
WARNING:
Be sure to turn the TIMER knob back to “
0” (off) position when the oven is not in use, or the oven will start
when the oven door is closed.
1. Press the MICROWAVE POWER LEVEL button until the
WATT indicator indicates the desired level.
2. Set the TIMER knob to the desired cooking time.
The oven starts cooking, and the light display will count down.
When cooking has finished, the TIMER knob will return to
“
0”, the audible signal will sound, and the oven and oven
lamp will turn off automatically.
NOTES:
1. You can set the TIMER when the WATT indicator is lit. The WATT indicator will light while the oven door is
open. It will also light for 3 minutes after a preceding operation, i.e. closing the door, selecting the power
level or cooking completion.
2. Your oven is fitted with a safety feature which avoids misuse. If the TIMER remains at the “0” position for more
than 3 minutes, you must open the oven door or press the MICROWAVE POWER LEVEL button before the
TIMER can be operated again.
3. Your oven can be programmed up to 30 minutes. The input unit of cooking or defrosting time varies from 15
seconds to 5 minutes, depending on the total cooking/defrosting time, as marked on the LIGHT DISPLAY.
• When the oven is plugged in, the WATT indicator will show 800 watt.
• To set the microwave power level, press the MICROWAVE POWER LEVEL button until the WATT
indicator indicates the desired level. If you miss your desired level, press the MICROWAVE POWER
LEVEL button until you reach the level again.
• Your oven will memorize the power level of the last operation. When you press the MICROWAVE
POWER LEVEL button whilst the WATT indicator is not shown, the last power level will be indicated on
the control panel. If the electrical power supply to your oven should be interrupted, the memory will be
erased.
MICROWAVE COOKING
1.
2.
8.SEEG R216 ENGLISH-1 02.3.19 10:13 PM Page 4
To Next Page
Loading...
Need help?
General
