E – 5
A43941 KUWAIT R241K O/M
Getting Started
Step Procedure Pad Order Display
1
Plug the oven into a power point.
Ensure the door is closed.
Flashing four eights.
Only the dots will remain.
Clock Setting
Step
Procedure Pad Order Display
Press the CLOCK pad.
* To enter the present time of day e.g. 11:34 (AM or PM).
Enter the correct time of day by pressing
the numbers in sequence.
2
3
Press the CLOCK pad again.
The dots will flash on and
off.
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Ex. 13:45),
will appear
in the display.
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
If you wish to know the time of day during the cooking mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
1
2
Press the STOP/CLEAR pad so that the
oven beeps.
BEFORE OPERATING
KUWAIT R241K,En,P04-09 05.4.6, 6:35 PM5
To Next Page
Loading...
Need help?
General
