Sharp R-632 User Manual

7
BEFORE OPERATION
SETTING THE CLOCK
Plug in the oven.
1. The oven display will flash:
2. Press the STOP button, the display will show .
3. To set the clock, see below.
4. Heat the oven without food. (See page 10,
Note 2).
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
1.
2.
x1
NOTE: Plug the oven in. The display will flash . Press the STOP button and the display will show
. Set the clock according to the following instructions. If the power to the oven is interrupted,
when it is plugged in again the display will flash . If this occurs when the oven is operating,
the programme will be lost. The time of day will also be lost. The clock must be reset to the correct time of
day.
Example:
To set the 24 hour clock to 23:35.
(To set the 12-hour clock, press and hold the COOKING MODE button for 3 seconds. The display shows .)
To set the 24-hour clock, press the COOKING MODE button again after step 3 below. The display will show
KG
The display flashes.
1 x hold for 3 seconds. Press to enter the
24-hour clock.
Enter the hours by rotating the
TIMER/WEIGHT/POWER knob.
KG
Enter the
minutes.
(Example)
x1
x1
x1
x1
Press to change from
hours to minutes.
Press to start the clock.
1. 2.
4.3.
5. 6.
7.
R-632 English 0/M 25/3/99 10:26 am Page 7

Sharp R-632 Specifications

General

Brand	Sharp
Model	R-632
Category	Microwave Oven
Language	English