GB-16
INSTALLATION
1. Remove all packing materials from the inside of
the oven cavity and remove any protective film
found on the microwave oven cabinet surface.
2. Check the oven carefully for any signs of damage.
3. Place the oven on a secure, level surface, strong
enough to take the oven weight, plus the heaviest
item likely to be cooked in the oven. Do not place
the oven in a cabinet.
4. Select a level surface that provide enough open
space for the intake and/or outlet vents.
The rear surface of appliance can be placed
against a wall.
• The minimum installation height is 85 cm.
• A minimum space of 20cm is required between
the sides of the microwave oven and any
adjacent walls or objects.
• Leave a minimum space of 30 cm above the oven.
• Do not remove the feet from the bottom of the
oven.
• Blocking the intake and/or outlet openings can
damage the oven.
• Place the oven as far away from radios and TV
as possible. Operation of microwave oven may
cause interference to your radio or TV reception.
EN-16
5. Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
WARNING: Do not place the oven where heat,
moisture or high humidity are generated, (for
example, near or above a conventional oven) or near
combustible materials (for example, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.
Do not touch the exterior of the oven during or shortly
after operation as it will be hot.
20 cm
30 cm
20 cm
0 cm
min
85 cm
BEFORE OPERATION
This model has a clock function and the oven uses less than 1.0 W in stand by mode.
To set the clock, see next page.
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
EN-17
EN-16
To Next Page
Loading...
Need help?
General
