Siemens RDF301 Quick Start Guide

CE1N3171en
2012.10-04
Building Technologies
s
3
171
RDF301 RDF301.50
RDF600KN
Semi flush-mount
room thermostats
with KNX communications
RDF301
RDF301.50
RDF600KN
For 2-pipe, 2-pipe with electrical heater, and 4-pipe fan coil units
For use with compressors in DX type equipment
 KNX bus communications (S-mode and LTE mode)
 Backlit display
 2P / PI / P control
 Outputs for on/off or 3-position control
 Outputs for 3-speed or 1-speed fan
 2 multifunctional inputs for keycard contact, external sensor, etc.
 Operating modes: Comfort, Economy and Protection
 Automatic or manual fan speed control
 Automatic or manual heating/cooling changeover
 Minimum and maximum limitation of room temperature setpoint
 Control depending on the room or the return air temperature
 Adjustable commissioning and control parameters
 Commissioning with Synco ACS, ETS or via local HMI
 Integration into Synco
 Integration into Desigo and Apogee via group addressing (ETS) or via
individual addressing
 Integration into third-party system via group addressing (ETS)
 AC 230 V operating voltage

Siemens RDF301 Specifications

General

Brand	Siemens
Model	RDF301
Category	Thermostat
Language	English