Siemens RDH10RF/SET User Manual

3/12
Siemens Room temperature controllers CE1N3070en
Building Technologies 01.03.2010
Mechanical design
The controller consists of 4 parts:
• Plastic housing with digital display accommodating the electronics, operating ele-
ments and built-in room temperature sensor
• Baseplate (mounting base)
• Removable battery compartment
• Fold-out stand
The housing engages in the baseplate and snaps on. There is a reset button on the
rear of the unit.
1 Room temperature display in °C
2 Indicates a heat request
3 Temperature setting knob
4 Battery compartment
5
Comfort temperature setpoint
6
RF
TEST Indicates RF signal test
7
Indicates low battery power; replace batteries
Key

Siemens RDH10RF/SET Specifications

General

Brand	Siemens
Model	RDH10RF/SET
Category	Temperature Controller
Language	English