Siemens SCALANCE M876-4 User Manual

Approvals
A.1 INSTALLATION
SCALANCE M874, M876
88 Operating Instructions, 08/2018, C79000-G8976-C331-08
A.1
INSTALLATION
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
(https://support.industry.siemens.com/cs/ww/en/view/27069465)
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
(https://support.industry.siemens.com/cs/ww/en/view/84922825)
● "EMC Installation Guidelines" configuration manual
(https://support.industry.siemens.com/cs/ww/en/view/60612658)
WARNING
Personal injury and property damage can occur
The installation of expansions that are not approved for products or their target systems
may violate the requirements and regulations for safety and electromagnetic compatibility.
Only use expansions that are approved for the system.
Note
The test was performed with a device and a connected
communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these
standards, adherence to the corresponding values cannot be guaranteed.

Siemens SCALANCE M876-4 Specifications

General

Brand	Siemens
Model	SCALANCE M876-4
Category	Network Router
Language	English