Approvals
SCALANCE XR-300WG
66 Operating Instructions, 05/2017, C79000-G8976-C454-01
The following devices meet the FDA and IEC requirements listed below:
Fulfills FDA and IEC requirements
SCALANCE XR328-4C WG With modular devices, the marking is on the
Figure A-1 FDA and IEC approvals
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
● "Industrial Ethernet / PROFINET - Passive network components" System Manual
You will find information on the system manuals in the section "AUTOHOTSPOT", in
"Further documentation".
● "EMC Installation Guidelines" configuration manual
60612658 (http://support.automation.siemens.com/WW/view/en/60612658
)
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
To Next Page
Loading...
Need help?
General