Siemens SIMATIC NET CP 5622 User Manual

Software installation
2.2 Uninstalling the "SIMATIC NET PC Software"
CP 5622
14 Operating Instructions, 05/2021, C79000-G8976-C279-04
2.2 Uninstalling the "SIMATIC NET PC Software"
Condition
The "SIMATIC NET PC Software" is installed on the PG/PC.
Procedure
Note
The recommended procedure removes the entire "SIMATIC NET PC Software" on the PG/PC,
not only the driver for the communications processor.
Uninstall the entire software package as described and recommended in the installation
manual "SIMATIC NET PC Software".
You will find the installation manual on the "SIMATIC NET PC Software" DVD or on the Product
Support pages under the following entry ID:
77377602 (https://support.industry.siemens.com/cs/ww/en/view/77377602)

Siemens SIMATIC NET CP 5622 Specifications

General

Brand	Siemens
Model	SIMATIC NET CP 5622
Category	Computer Hardware
Language	English