Hardware installation
3.4 Installing on a DIN rail
CP 5711
26 Operating Instructions, 12/2021, C79000-G8976-C283-08
Removing the communications processor from the DIN rail
EXPLOSION HAZARD
Improper disassembly may result in a risk of explosion in hazardous areas.
For proper disassembly, observe the following:
• Before starting work, ensure that the electricity is switched off.
• Secure remaining connections so that no damage can occur as a result of the
disassembly if the system is accidentally started up.
To release the locking mechanism in the lower DIN rail holder, pull the DIN rail holder down.
If necessary use a screwdriver or pliers.
To Next Page
Loading...
Need help?
General
