Preface
SCALANCE S615
4 Operating Instructions, 10/2022, C79000-G8976-C389-07
Documentation on configuration
You will find detailed information on configuring the devices in the following configuration
manuals:
• SCALANCE S615 Web Based Management
• SCALANCE S615 Command Line Interface
Make sure that you read the explanations and instructions in the readme.htm file.
Further documentation
• System manual "Industrial Ethernet"
The system manual contains information on other SIMATIC NET products that you can
operate along with the devices of this product line in an Industrial Ethernet network.
There, you will find among other things optical performance data of the communications
partner that you require for the installation.
The "SIMATIC NET Industrial Ethernet" system manual can be found on the Internet pages
of Siemens Industry Online Support under the following entry ID: 27069465
(https://support.industry.siemens.com/cs/ww/en/view/27069465)
• "Passive network components" system manual
This system manual contains installation instructions for several of the most common
components and guidelines for setting up networked automation plants in buildings.
The "Passive network components" system manual can be found on the Internet pages of
Siemens Industry Online Support under the following entry ID: 84922825
(https://support.industry.siemens.com/cs/ww/en/view/84922825)
SIMATIC NET manuals
You will find SIMATIC NET manuals on the Internet pages of Siemens Industry Online Support:
• using the search function:
Link to Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/)
Enter the entry ID of the relevant manual as the search item.
• In the navigation panel on the left hand side in the area "Industrial Communication":
Link to the area "Industrial Communication"
(https://support.industry.siemens.com/cs/ww/en/ps/15247/pm)
Go to the required product group and make the following settings:
tab "Entry list", Entry type "Manuals"
To Next Page
Loading...
Need help?
General
