Siemens SIMATIC NET SCALANCE SC-600 User Manual

Introduction
SCALANCE SC-600
Operating Instructions, 10/2021, C79000-G8976-C453-04
9
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according
to the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Device defective
If a fault develops, please send the device to your Siemens representative for repair.
Repairs on-site are not possible.
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing
confidential data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
Recycling and disposal
The product is low in pollutants, can be recycled and meets the requirements of the
WEEE directive 2012/19/EU "Waste Electrical and Electronic Equipment".
Do not dispose of the product at public disposal sites. For environmentally friendly
recycling and the disposal of your old device contact a certified disposal company for
electronic scrap or your Siemens contact.
Keep to the local regulations.
You will find information on returning the product on the Internet pages of Siemens
Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/view/109479891)

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English