12.98 Certificates
Siemens AG 6SE7087-7NP87-2DD0
SIMOVERT MASTERDRIVES Operating Instructions 9-1
9 Certificates
Automation and Drives
Confirmation
Erlangen,15.09.1998
This confirms that
Equipment drive converter
•
Type SIMOVERT
MASTERDRIVES
•
Order No. 6SE70xx-xxPxx
1)
•
Service work in operation is only permissible on a unit which is not live.
•
The converter must be switched into a no-voltage condition and isolated from the
supply when replacing any part/component.
•
All panels and the DC link terminals must be closed during operation.
The local operating regulations (e.g. EN 50110-1, EN 50110-2) must be observed when
operating the equipment.
is manufactured in conformance with EN 60204 Section 6.2
(corresponds to DIN VDE 0113 Section 6.2).
Thus, this equipment conforms to the appropriate regulations in Germany according
to VBG 4 §2 (2) (VBG is a German regulatory body for safety-related issues).
This equipment fulfills the protection requirements against electric shock according to
DIN VDE 0106 Part 100 when the following safety rules are observed:
Mickal
A&D DS A P1
1) See rating plate for complete type designation, serial number and technical data
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General
