Siemens SINUMERIK 840D sl Diagnostics Guide

5-987
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
System Reactions on Alarms 5
Names COMPBLOCKWITHREORG
Effect Block preparation has detected an error, which can be rectified by modifying the pro-
gram. Reorganization is performed after a program modification.
− Correction block with reorganization.
Names COMPENSATIONBLOCK
Effect Block preparation has detected an error, which can be rectified by modifying the pro-
gram.
− Correction block
Names FOLLOWUP
Effect Follow-up of axes
− NC switches to follow-up mode
Names INTERPRETER STOP
Effect Program execution is aborted after all the prepared blocks (interpolator buffer) have
been processed.
− Interpreter stop
Names LOCALREACTION
Effect − Local alarm response
Names NOALARMREACTION
Effect − No alarm reaction
Names NOREADY | NCKREACTIONVIEW
Effect NCK ready off: Active rapid deceleration (i.e. with maximum braking current) of all drives
Clearing of servo enable for all NC axes Release of NC ready relay
− NC not ready

Siemens SINUMERIK 840D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 840D sl
Category	Control Systems
Language	English