on o on o on o on on MPP address 213
o o on o on o on on MPP address 212
on on o o on o on on MPP address 211
o on o o on o on on MPP address 210
on o o o on o on on MPP address 209
o o o o on o on on MPP address 208
on on on on o o on on MPP address 207
o on on on o o on on MPP address 206
on o on on o o on on MPP address 205
o o on on o o on on MPP address 204
on on o on o o on on MPP address 203
o on o on o o on on MPP address 202
on o o on o o on on MPP address 201
o o o on o o on on MPP address 200
on on on o o o on on MPP address 199
o on on o o o on on MPP address 198
on o on o o o on on MPP address 197
o o on o o o on on MPP address 196
on on o o o o on on MPP address 195
o on o o o o on on MPP address 194
on o o o o o on on MPP address 193
o o o o o o on on MPP address 192
x x x x x x x x "
on o o o o o o o MPP address 001
o o o o o o o o MPP address 000
6.4 Setting the box ID
Procedure
Rotary coding switches S301 and S302 allow you to set a unique ID for the station identier of
the handheld unit connections at the MPP 1500D/E. A screwdriver is used to set the ID.
The setting is entered in the hexadecimal format. Values in the decimal format between 0 and
255 can be entered.
The following example shows the set hexadecimal address 27, which corresponds to decimal
address 39.
Connecting up
6.4 Setting the box ID
Machine Push Button Panel: MPP 1500D / MPP 1500E
Equipment Manual, 04/2021, A5E50753610B AA 47
To Next Page
Loading...
Need help?
General
