Operating
6.13 Units
SITRANS LU150
32 Operating Instructions, 03/2016, A5E34590123-AB
The units of the measurement reading can be selected as follows:
1 = metres, m (factory setting)
2 = feet, ft
The selected units are also applicable to the 'Blanking' adjustment.
To change the units, go to the
' display (as described in Adjustments (Page 25)), and
proceed as follows:
1. Press the
key to scroll forward through the available options (1-2), and press the
key
to scroll backwards.
2. Once you have reached the appropriate value, stop pressing the key. The display
automatically returns to the Run mode (6 secs).
3
seconds
Indicates that the device is now in units mode.
The current option is shown
for option 2
6
seconds
Option 2 has now been selected.
To Next Page
Loading...
Need help?
General
