60
Transportation, e.g. if moving house
Preparatory work
1.
Turn off the tap.
2.
Release the water pressure in the supply hose.
Maintenance – Filter in the water inlet hose ~ Page 38
3.
Drain any residual detergent solution.
Maintenance – Drain pump blocked ~ Page 36
4.
Isolate the washing machine from the power supply.
5.
Remove the hoses.
Installing transportation protection devices
1.
Remove covers and keep in a safe place.
If required, use a screwdriver.
2.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
²
– Remove the transportation protection devices! ~ Page 50
– To prevent unused detergent from flowing into the outlet
during the next wash: Pour 1 litre of water into dispenser II
and start the Drain programme.
Installing transportation protection devices
www.devicemanuals.eu
Installing transportation protection devices
Remove covers and keep in a safe place.
www.devicemanuals.eu
Remove covers and keep in a safe place.
If required, use a screwdriver.
www.devicemanuals.eu
If required, use a screwdriver.
Insert all 4 sleeves.
www.devicemanuals.eu
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
www.devicemanuals.eu
Clamp mains cable on the holders. Insert and tighten the
bolts.
www.devicemanuals.eu
bolts.
To Next Page
Loading...
Need help?
General