■ 16
│
GB
│
IE
SHOM 1000 A1
♦ When you select a function, the preset cooking temperature will be shown
on the display. If you want a diff erent cooking temperature, you can set this
to anything between 50°C and 230°C in 1° increments by pressing the
or
buttons. If you hold down the or the button, the temperature
setting changes in increments of 10°.
5) Press the Temp|Timer button
to switch between the cooking temperature
and cooking time. You can set the displayed cooking time to between 1 and
60 minutes by pressing (or pressing and holding) the or the button.
NOTES
►
When experimenting with cooking times, start with low values and
increase them until you fi nd the correct cooking time.
► Changes to the cooking temperature will not be stored in the appli-
ance and must be re-entered later.
► The rotisserie function is activated by default for all cooking functions.
This is indicated by the LED above the rotisserie button . To switch
off the rotisserie function for the upcoming cooking process, press
the rotisserie button . The LED will go out. The direction of rotation
changes for each cooking process.
6) Pull the lid 5 up using the handle 4 until the lock engages.
7) Taking into account the explanations in the section "Accessories", add the
food to be prepared to the inner bowl 0 of the appliance.
CAUTION
Damage to the device!
► Position the food in the inner bowl 0 so that the heating element 6
does not come into contact with the food when the lid 5 is closed.
Take into account the rotation of the food (if applicable).
► Bear in mind that semi-solid food should not be fi lled any higher than
the opening z in the inner bowl 0. Otherwise food can get into the
rotary drive.
NOTE
If you are not using the basket q, place the food at a distance of 2cm to
the inner bowl 0 so that hot air can circulate unimpeded throughout the
inner bowl 0.
The weight of the food to be cooked must not exceed 5kg.
8) Raise the lid 5 slightly using the handle 4 and press the release button 7
for the lock function. Close the lid 5.