16 US-EN
Remove the cutting unit
1
.
Remove any remaining hair clippings from the
cutting unit
1
using the cleaning brush
13
.
Apply one or two drops of blade oil
14
be-
tween the blades and the moving parts.
Adjust the length position indicator
4
to
₄ in / 2.0 mm after cleaning the product
before reattaching the cutting unit
1
to the
product.
Note: Clean the cutting unit, comb attach-
ment and thinning attachment after every use.
Storage
Place the product in the charging station
6
to
store it. Or store inside the travel case
16
.
Troubleshooting
Problem Cause Solution
The product
does not
work.
The battery
may not be
charged.
Recharge the
product.
Trimming is
difficult.
Hair may
be stuck in-
side the
blades.
Clean the cutting
unit
1
and the
product and oil it if
necessary.
Note: For optimal battery capacity the product
must be fully discharged during operation and fully
charged roughly every 6 months.
Disposal
Dispose of the packaging through your
local recycling facilities and in compli-
ance with all federal, state and local
regulations.
To Next Page
Need help?
General
