14 GB/IE/NI
Inserting batteries
Note: To avoid losing the time and alarm clock settings as a result
of a potential power failure, insert two batteries 1.5 V, AA. The batteries
ensure that the internal clock also functions during a power failure. As
soon as the power is switched on again, the correct time is shown on
the display
1
automatically.
Note: During emergency mode the display, radio, alarm and night-
light do not function.
Note: The batteries should be replaced once a year to guarantee
that the alarm clock works perfectly.
Open the battery compartment
15
on the underside of the product
by removing the cover.
Insert two 1.5 V, AA batteries (not included in the scope of delivery)
into the battery compartment
15
. Ensure correct polarity. This is
indicated in the battery compartment
15
.
Close the battery compartment
15
by placing the cover on top of it
and clicking it into place.
Establishing the power supply
Note: Before you connect the product, compare the connection
information on the type plate (voltage and frequency) with your mains
supply information. Ensure that the values correspond so that no damage
occurs to the product.
Plug the mains plug into a socket. The time ( ) will flash on the
display
1
.
To Next Page
Loading...
Need help?
General
