GB
│
IE
│
NI
│
13 ■
SKHK 40 A1
Making a call
♦ Use your smartphone to dial the required telephone number.
The call is automatically transferred to the headphones.
♦ Speak into the microphone
q on the headphones to make
your call.
Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear
the ringtone in the headphones and playback is stopped. After
finishing the call, playback will be resumed automatically.
► You can accept/reject calls via the headphones or your
smartphone. The sound is automatically played back through
the headphones.
Button
6
Function
Press 1 x briefly (for incoming call) Accept call
Press 1x briefly (during call) End call
Press and hold for approx. 2 seconds (for
incoming calls)
Reject call
Music playback via AUX IN
You can use the supplied audio cable e to connect the headphones
to non-Bluetooth
®
-compatible playback devices. In AUX IN mode,
the headphones behave like normal, cable-connected headphones
and can even be used with an empty battery. The Bluetooth
®
function is deactivated and the buttons on the
headphones do not function.
♦ Make sure that the headphones are switched off.
♦ Connect the audio cable
e to the AUX IN socket 8 of the
headphones.
♦ Connect the audio cable
e to the audio output (e.g. head-
phone jack) on the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section Wearing
the headphones.
♦ Set the desired volume on the playback device.
To Next Page
Loading...
Need help?
General
