■ 20
│
GB
│
IE
│
NI SEMM 1470 A1
7) Use the “Milk quantity” knob to set how much milk you want to use for your
latte macchiato. Turn the “Milk quantity” knob to the left to reduce the
amount of milk. Turn the “Milk quantity” knob to the right to increase the
amount of milk. Make sure you do not turn the knob further than the “ ”
marking. Otherwise you will be in cleaning mode (see section “Cleaning
and care”).
NOTE
► You can even correct the amount of milk during preparation by turning the
"Milk quantity" knob .
8) Switch the appliance on using the on/off switch % and wait until all control
lamps light up permanently. The appliance has now heated up.
9) Press the “Small” latte button 3
if you want to prepare a small latte
macchiato. The control lamp for the “Small” latte button 3
lights up.
Press the “Large” latte button
if you want to prepare a large latte
macchiato. The control lamp for the “Large” latte button
lights up.
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet -,
the milk has stopped flowing out of the milk nozzle and all control lamps
light up. You can now remove your latte macchiato.
NOTE
► You can stop the preparation at any time by pressing any button.
NOTE
► If you want to add a little extra frothed milk to your drink: Press the "Large"
cappuccino button
2x in a row. The control lamp for the "Small"
cappuccino button !
and the control lamp for the "Large" cappuccino
button
light up and frothed milk comes out of the milk nozzle .
Stop the milk output by pressing any button. The milk will stop coming out
automatically after 70 seconds.
To Next Page
Loading...
Need help?
General
