■ 8
│
GB
│
IE
SAS 7.4 LI B3
Information about the batteries
1) This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries.
2) For care of the batteries, we recommend the following: Once the batteries
have been charged, disconnect the mains adapter
4 from the mains socket.
Do not reconnect the mains adapter 4 with the mains socket until the hand-
held vacuum cleaner’s suction power has noticeably decreased.
NOTE
► The appliance is equipped with a temperature monitor to protect the batter-
ies. At high ambient temperatures (in rare cases) the charging process may
be interrupted or the appliance may switch off automatically:
– The charge indicator lamp
7 lights up red during charging. The
charging process is interrupted and resumes automatically as soon as
the temperature of the appliance has dropped.
– The charge indicator lamp
7 flashes red three times at one second
intervals during operation. The appliance switches off automatically.
Allow the appliance to cool for 20–30 minutes before switching it on
again.
Installation of the wall bracket
DANGER – ELECTRIC SHOCK!
► Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket
3.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug
5 of the mains adapter 4 into the wall bracket 3 as
shown in the diagram. Secure the barrel plug 5 by turning it.
To Next Page
Loading...
Need help?
General
