61 GB/MT
Using the Bluetooth
®
speaker
via cable
Note: Music playback via cable takes priority over
music playback via Bluetooth
®
. Music playback from
a Bluetooth
®
source is therefore interrupted once the
jack lead
13
is plugged into the jack
7
. The signal
LED
2
lights up green.
Plug one end of the jack lead into the jack and
the other into the headphones socket on an
electronic sound source (e.g. MP3 player, stereo
system).
Switch on the sound source.
If the Bluetooth
®
speaker is off, press and hold the
button
10
until the signal LED light green and
two beeps sound.
Start playback on the sound source and adjust
the volume to the highest possible volume. Adjust
the volume on the speaker using the
button
9
(up) or the
button
11
(down).
Start playing music on the sound source.
Switching between AUX-in
connection and the Bluetooth
®
connection
Aux-in connection has a higher priority over the Blue-
tooth
®
connection as following:
To Next Page
Loading...
Need help?
General
