Silvercrest SBLV 20 A1 User Manual

SBLV 20 A1
GB
│
IE
│
11 ■
NOTE
►
Note that while in AUX mode, you can also set the volume via the external
playback device.
► If the playback sounds distorted, reduce the volume on the external play-
back device.
Troubleshooting
The following table will help you to identify and rectify minor malfunctions:
Faults Possible cause Remedy
Device does not
switch on.
The power cable
is not con-
nected.
Connect the power cable
to
the AC
~
connection socket
.
The socket is not supplying any
power.
Check the house mains fuse.
The integrated battery is empty. Charge the integrated battery.
No sound.
The volume on the device or the
playback device is set to minimum.
Increase the volume on the device
or on the playback device.
Playback has not been started on
the playback device.
Start playback on the playback
device.
The Bluetooth
®
connection
cannot be
established.
Possibly, not all of the Bluetooth
®
devices are compatible.
Check the settings on your
Bluetooth
®
device.
Bluetooth
®
transmission is
not activated on your playback
device.
Activate Bluetooth
®
transmis-
sion on your playback device.
Please refer to its operating
instructions for more information.
The playback device is not paired
with the device.
Repeat the pairing process (see
section Bluetooth
®
mode).
The distance between the device
and the playback device is too
great.
Ensure that the device is no more
than 10 metres away from the
playback device.
Point the remote control towards
the front of the device.
Playback sounds
distorted in AUX
mode.
The volume is set too high on the
external playback device.
Reduce the volume on the external
playback device.
NOTE
► If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section Service).

Silvercrest SBLV 20 A1 Specifications

General

Brand	Silvercrest
Model	SBLV 20 A1
Category	Speakers
Language	English