Silvercrest SFB 10.1 C3 User Manual

SilverCrest SFB 10.1 C3
24 - English
Deleting all favourite channels (DEL ALL)
It is only possible to delete all favourite channels at once. Individual
favourite channels cannot be deleted but they can be overwritten.
1. Press the device button for the device that you wish to program.
2. Press and hold the button for at least 3 seconds.
3. Press , select “FAV CH” and press to confirm.
4. Press , select “DELETE ALL” and press to confirm.
The display reads “SURE DELET”.
5. Press to confirm. The display reads “DELETED” and then
“SETUP”. Next you can program more favourite channels or exit the
menu.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
The timer function (TIMER)
SLEEP TIMER
This feature lets you set a delay time after which a selected device will
switch off.
1. Press the device button for the device that you wish to program.
2. Press and hold the button for at least 3 seconds.
3. Press , select “TIMER” and press to confirm.
4. Press , select “SLEEP TIMER” and press to confirm.
The display reads “SET TIMER” and suggests a delay time of 30. The
first digit flashes.
5. Use the number buttons to enter a value between 01 and 99
minutes. Press to confirm. The display reads “SUCCESS” and
then “SLEEP TIMER”.
6. When the sleep timer is programmed, the icon appears on the
left of the display.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Event timers (TIMER 1….TIMER 4)
The remote control includes 4 event timers that allow the remote control to
send a preset command sequence at a set time.
1. Press and hold the button for at least 3 seconds.
2. Press , select “TIMER” and press to confirm. The
display reads “SLEEP TIMER”.
3. Press , select a desired timer from “TIMER1” to
“TIMER4” and press to confirm. The display shows a 4-digit time.
The first two digits representing the hour flash. Here, you set the time
at which you want the command sequence to be sent.
4. You can use the number buttons to set a time from 00:00 to 23:59.
Use the buttons to toggle between the 4 digits, e.g. to correct
any mistakes. Press to confirm the set time.
The timer is always set in 24-hour format. If you have set
the remote control preferences to the 12-hour format,
please note the following:

Silvercrest SFB 10.1 C3 Specifications

General

Brand	Silvercrest
Model	SFB 10.1 C3
Category	Remote Control
Language	English