Silvercrest SKR D1 C3 User Manual

19GB
 Presetting currently active
station
You can store up to 60 stations (30 FM and
30 DAB).
 Press and hold PRESET [6].
 Preset store<#:(Empty)> appears on the
display [4].
 Turn SELECT/ENTER/SNOOZE [1] to select
a desired station memory.
 Press SELECT/ENTER/SNOOZE [1] to
confirm.
 The station is stored. Preset # stored
appears on the display [4].
NOTE: Station memories that are already
occupied will be overwritten without further
notice.
 Recalling a preset station
 You can recall a previously saved station by
pressing PRESET [6].
 Turn SELECT/ENTER/SNOOZE [1] to select
the desired station memory.
 Push SELECT/ENTER/SNOOZE [1] to
confirm.
NOTE: Preset Empty is displayed if the
preset number is unoccupied.
 Sleep timer
In operation mode:
 Press and hold TIMER/SLEEP[9] for approx.
2seconds. Press TIMER/SLEEP repeatedly
to choose the sleep time: Sleep off/
15/30/45/60/90/120 minutes.
 After the selected time has elapsed the product
switches into standby mode.
 Checking the remaining sleep time: The interval
remaining is shown in the display.
 Cancelling the sleep timer: Press and hold
TIMER/SLEEP [9] repeatedly until Sleep off
appears in the display.
 Alarm setting
 In standby or operation mode, press and hold
MENU/INFO [8] for 2 seconds.
 Turn SELECT/ENTER/SNOOZE [1] to select
<SYSTEM>.
 Push SELECT/ENTER/SNOOZE [1] to
confirm.
 Turn SELECT/ENTER/SNOOZE [1] to select
<Alarm>.
 Push SELECT/ENTER/SNOOZE [1] to select
Alarm 1 or Alarm 2.
 Turn SELECT/ENTER/SNOOZE [1] to select
<Alarm on> or <Alarm off>.
 Push SELECT/ENTER/SNOOZE [1] to set
the hours.
 Push SELECT/ENTER/SNOOZE [1]
repeatedly to set the minutes.
 Push SELECT/ENTER/SNOOZE [1]
repeatedly to select the alarm duration
(options: 15/30/45/60/90 minutes).
 Push SELECT/ENTER/SNOOZE [1]
repeatedly to select the alarm sound (options:
<Buzzer>, <FM>, <DAB>).
 Push SELECT/ENTER/SNOOZE [1] to
set the alarm repetition (options: <Once>,
<Daily>, <Weekdays>, <Weekends>).
 Push SELECT/ENTER/SNOOZE [1] to select
the volume of the alarm.
 Push SELECT/ENTER/SNOOZE [1] to select
<Alarm off> or <Alarm on>.
 When the alarm is successfully set, <Saved>
appears on the display [4].

Silvercrest SKR D1 C3 Specifications

General

Brand	Silvercrest
Model	SKR D1 C3
Category	Radio
Language	English