GB
│
IE
│
NI
│
17 ■
SMWC 700 A1
Selecting the power level
♦ Press the microwave button 6 . "700" (700 watts) appears on the
display 5.
♦ Use the dial 9 to set the required power output.
You can select between 0 and 700 W in 50-W steps.
♦ Press the dial 9 to confirm the set power level.
Setting the cooking time
After you have selected the power level, set the desired cooking time:
♦ The display 5 shows 00:00. Set the desired time with the dial 9.
You can set a time from 10 seconds to 95 minutes.
The increments for setting the cooking time are as follows:
– from 0 sec to 5 min: in 10-second increments
– from 5 to 10 min: in 30-second increments
– from 10 to 30 min: in 1-minute increments
– from 30 to 95 min: in 5-minute increments
Starting the cooking process
Once you have set the power level and the cooking time, you can start cooking:
♦ To start cooking, press the dial 9. Cooking begins and the time counts
down.
♦ Once the set time has elapsed, "End" appears on the display 5 and you
will hear four beeps. Press the stop button q
or open the door of the
appliance so that it switches back into standby mode.
If you do nothing, there will be a further four beeps every two minutes.
Quick start function 1
♦ In standby mode, turn the dial 9 to the right (towards ) and set the
required cooking time.
♦ Start cooking at 700 W by pressing the dial 9.
To Next Page
Loading...
Need help?
General
