Silvercrest SSH 600 B2 User Manual

SSH 600 B2
■ 10
│
GB
│
IE
Operation
Requirements for the operating location
For safe and trouble-free operation of the appliance, the operating
location must fulfil the following requirements:
– The appliance may only be operat-
ed in an upright position and fully
assembled. The spacers 0 must
touch the wall (see fig. 1).
– The mains socket must be easily
accessible so that the appliance
can be quickly disconnected in an
emergency.
– The minimum distances between the
appliance and other objects of 20
cm to the side, 20 cm to the top,
10 cm to the bottom and 1 m to the
front must be observed (see fig. 2).
– Ensure that the air can always enter
and escape freely.
Otherwise, there could be a heat
build-up in the appliance.
DANGER!
Risk of fire due to contact with
fabrics!
Do not allow flammable materials
(e.g. textiles) to come into contact
with the appliance.
Do not cover the appliance.
Fig. 1
Fig. 2

Silvercrest SSH 600 B2 Specifications

General

Brand	Silvercrest
Model	SSH 600 B2
Category	Heater
Language	English