SRM9022 ~ PMR MOBILE RADIO USER GUIDE
© TMC Radio 2005 page 28 TNM-U-E-0063 Issue 1
7. SPECIAL FUNCTION BUTTONS
This section lists Functions that may be programmed to the F1, F2, F3, F4, F5 or F6
buttons.
Consult your TMC Radio Dealer for which functions have been programmed in to
your radio.
7.1 MONITOR
Opens/Closes the audio (signalling) mute.
Only valid on Non-Community Repeater type channels and/or Closed Selcall
channels without Receiver Lock-out programmed.
7.2 SQUELCH DEFEAT
Opens/Closes the squelch (carrier) mute.
7.3 RESET
Closes the audio (signalling) mute on closed Selcall Channels.
7.4 S
CAN
Activates Scanning, refer to Section 5.5.
7.5 A
UXILIARY
Toggles the external output, refer to Section 5.8.
7.6 SEND-2
Sends a specific selcall sequence.
7.7 TRANSPOND
Enables/Disables Individual Call Acknowledge.
7.8 CTCSS
Defeats the CTCSS mute on the channel
Only valid on Non-Community Repeater type channels and/or Open Selcall channels.
7.9 MUTE
Provides direct access to the Mute Setup screen (refer to Section 6.1.2) and allows
the user to change the mute level from that screen.
7.10 E
XTERNAL ALERT
Enables/Disables control of External Output via Selcall Decodes, refer to Section 5.4.
7.11 G
OTO CHAN A, B, C, D
Selects predefined Channel A, B, C or D, and (may) return on the second press.
The Defined Channel may be redefined if held for approximately 2 seconds.
7.12 SPECIAL ENC 1…8
Sends Special Encode 1, 2, … 8
7.13 ALARM
Put the mobile into Alarm mode.
7.14 REPEATER DEFEAT
Allows the radio to transmit on the reverse frequency on a Repeater Channel.
When the button is pressed again (or the Channel is changed) the transmit frequency
reverts to the original setting.
To Next Page
Loading...
Need help?
General
