Simplicity 1021 User Manual

fwimptidfMf
Specifications
lu o Q
_J I III I lU
19 AND 21 INCH ROTARY MOWER
SPECIFICATIONS
MOWER
HOUSING
BLADE
AND DRIVE
HEIGHT
ADJUSTERS
HANDLE
I 2 W
L
MAKE
Model No. 92908
•
•
BRIGGS &
Model No. 92998
•
STRATTON Model No. 92995
•
HORSEPOWER: 2Vz
CYCLES: 4
CYLINDER: 1
BORE: 2-9/16"
STROKE: 1-3/4"
DISP: 9.02 Cu. In.
OIL CAPACITY: 1-1/4Pts.
FUELCAPACITY: 1 Qt.
MANUAL ^
STARTER
ELECTRIC
STARTER
Sealed Air Cleaner (Oiled Foam)
Air Vane Governor
Automatic Choke w/ Positive Purge
High-Tension Magneto Ignition
Quiet Muffler with Low Back
Pressure
IPts. High-Carbon Nodular Iron Crank
Shaft
It. Zinc Flywheel Key
Geared Re-Wind, Vertical Pull
BATTERY: Sealed Ni-Cad Type
VOLTAGE: 14.4 (Nominal)
CURRENT CAPACITY: .6 Amp Hr.
CHARGING: Trickel - 100 Milliamps (Furnished)
STARTS PER CHARGE: UptolOO
MATERIAL: Die Cast Magnesium
DISCHARGE LOCATION: Right Front Corner
CATCHER LOCATION: Through Deck _
DECK DEPTH: 3-3/8" Above Blade
DECK DEPTH: 3-1 /4" Above Blade
TRIM OVERHANG: 2" (Left Side Only)
TRIM OVERHANG: 1-1/2" (Left Side Only)
Austempered Steel, Pre-Stressed Blade
Direct Drive
ARRANGEMENT: Staggered
MATERIAL: Steel, Ball Bearing Mounted with Felt Seals
MATERIAL: High-Density Plastic, Integral Bearings, Graphite Impregnated
DIAMETER - FRONT WHEELS: 6"
DIAMETER - REAR WHEELS: 10"
DIAMETER - REAR WHEELS: 8" _
TYPE: 3-Point, Fingertip Adjusted
POSITIONS: 6
MATERIAL: Steel-On-Steel, All Positions
CUTTING HEIGHT: 7/8" to 2-7/8" _
OPERATING POSITIONS: 2-Handle Height Adjustable to 2 Positions
STORAGE POSITIONS; 2 -Stand up or Fold
19"
HAND-PROPELLED
MANUAL
START

Simplicity 1021 Specifications

General

Brand	Simplicity
Model	1021
Category	Lawn Mower
Language	English