85
TP 400-2215-01-LG-SMA
60” Mower Height Adjust & Hitch Group
1 1715885 1 MOTOR, Electric Cutting Height Adjust
2 1960594 2 CAPSCREW, Hex Hd, Taptite, 5/16-18 x 7/8
3 1715875 1 BRACKET, Motor Mounting
4 1916964 3 LOCKWASHER, 1/4
5 1923341 3 CAPSCREW, Hex Hd, 1/4-20 x 3/4
6 1715886 1 ADAPTER, Motor
7 1960353 1 WASHER, Plain, 1/4
8 1923358 1 NUT, Hex, Center Lock, 1/4-20
9 1960581 1 PIN, Roll, 3/16 x 1 3/4
10 1715887 1 HUB, Shaft
11 1716998 1 WASHER, Nylon
12 1715891 1 BEARING, Thrust
13 1715888 1 SHAFT ASSEMBLY
14 1916951 1 NUT, Hex, 1/2-13
15 1916966 1 LOCKWASHER, 1/2
16 1715881 1 LEVER
17 1716424 1 COVER, Rod
18 1704314 1 FITTING, Lube
19 1715892 1 TRUNNION
20 1960489 1 CARRIAGE BOLT, 1/2-13 x 2-1/2
21 1679166 1 SPACER
22 1919438 4 NUT, Hex, Nylon Lock, 5/16-18
23 1919326 4 WASHER, Plain, 5/16
24 1678103 2 U-BOLT, Clamp
25 1708007 1 CLAMP
26 1924856 1 CAPSCREW, Hex Hd, Taptite, 5/16-18 x 1/2
27 1717053 1 COVER, Motor
28 1716986 1 HARNESS, Mower lift
29 1919439 2 NUT, Hex, Nylon Lock, 3/8-16
30 1708973 2 SPACER
31 1924940 2 WASHER, Plain, 3/8
32 1921969 2 CAPSCREW, Hex Hd, 3/8-16 x 1-1/2
33 153124 2 RETAINING RING, 5/8
34 1924366 4 WASHER, 5/8 (Qty 4 on units with SN prior to 60,000)
35 1715869 1 BRACKET ASSEMBLY, Front Mower Hitch
36 1715872 1 ROD, Latch
37 176012 3 PIN, Safety
38 1717075 2 PIN, Hitch
39 1715868 1 HITCH ASSEMBLY
40 1715871 2 SPACER
41 1719567 1 SHAFT, Hitch
42 * 1 BRACKET, Front Mower Hitch
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* If replacing bracket {Ref 42} on units prior to SN 60000, order PN 1719569 {Ref 35}. Spacer {Ref 40} and Shaft
{Ref 41} are NO LONGER required as these are integral to the replacement bracket.
The above parts group applies to the following Mfg. Nos.:
1692860 60” Mower Deck
1693123 60” Mower Deck
1693253 60” Mower Deck (Exp)
1693445 60” Mower Deck (Exp)
To Next Page
Loading...
Need help?
General
