Simplicity Jill User Manual

7
• Keep your canister clean and in good operating condition�
• Change vacuum bag once a month or when the bag is 2/3 full to maximize
cleaning performance�
• Always use genuine vacuum bags and replacement parts� Use of other products
may result in poor cleaning performance, potential vacuum cleaner damage and
may void vacuum warranty� Genuine products are designed for maximum cleaning
performance�
• Use only Authorized Simplicity Service Centers for parts or service�
• Store your canister carefully in a dry area�
• For optimum cleaning performance and safety, follow your owner’s
manualinstructions�
Problem Check Point Possible Solution
Suction power
is weak�
• Filters
• Vacuum bag
• Wand or hose
• Suction control slide
• Replace filters�
• If the vacuum bag is 2/3 full,
replace it�
• If clogged or blocked, remove
the object�
• Slide the control forward for
full suction power�
The vacuum
does not work�
• Hose
• When the vacuum bag is full
or any of the accessories are
blocked, the over-heating
protection for the motor is
activated and automatically
shuts down the vacuum�
• Insert the hose completely into
the hose unit until itclicks�
• Turn the vacuum off and
unplug the vacuum� Check the
vacuum bag and accessories
and remove any blockages� The
vacuum can be turned on again
after approximately 20minutes�
Power cord
does not
rewind
• Power Cord • Pull the power cord out a little
and press the cord rewind
buttonagain�
Power cord
won’t pull out
of the vacuum
• Power Cord Do not pull it out by force�
Rewind it a little by pressing
the cord rewind button and try
pulling it outagain�
Any other service should be performed by an AuthorizedSimplicity Service
Center� To locate your nearest Authorized Service Center, visit our website at
www�SimplicityVac�com or call 888-974-6759�
TROUBLESHOOTING
FOR BEST PERFORMANCE

Simplicity Jill Specifications

General

Brand	Simplicity
Model	Jill
Category	Vacuum Cleaner
Language	English