This vacuum is equipped with a thermal protector designed to protect it from
overheating due to restricted airflow (i�e� clogged hose)� Should this situation occur,
the thermal protector will automatically shut off the motor to prevent damage�
NOTE: To determine if the thermal protector turned off the vacuum, check the
headlight� If the headlight is on and the motor is off, the thermal protector safety
shut off the motor� If both the headlight and motor are off, there is another reason
(i�e� unplugged) the vacuum shut off�
How to Reset the Thermal Protector
1� Unplug the vacuum�
2� Allow the vacuum to cool at least 30 minutes�
3� Check for blockages, change the vacuum bag and replace the filters�
4� Plug in the vacuum and begin using�
If the vacuum fails to turn on, return it to an Authorized Simplicity Retailer forservice�
THERMAL MOTOR PROTECTION
9
To Next Page
Loading...
Need help?
General
