0
1
2
3
4
S
1
S
2
* The hemmer foot is an optional accessory not supplied with
your machine.
For hems in fine or sheer fabrics.
Set the stitch pattern dial to " " or " ".
Change to optional hemmer foot.
Neaten the edge of the fabric. At the beginning of the hem, turn
under the edge twice by about 3 mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly towards the back.
Insert the needle into the fabric, raise the presser foot and
guide the fold into the scroll on the foot (1).
Gently pull the fabric edge towards you and lower the presser
foot.
Begin sewing, guiding the fabric into the scroll by holding it
upright and slightly to the left (2).
26
Sewing with the optional hemmer foot
5
0
1
2
3
4
5
0
1
2
3
4
Stitch width dial
()models A & B
Stitch length dial
(models A, B & C)
Hemmer foot
(Optional)
1 2
To Next Page
Loading...
Need help?
General
