25
17. HOW TO DISENGAGE MOVABLE
UPPER KNIFE
• Turn handwheel over toward you and raise upper
knife to its highest position.
• Open looper cover (page 9).
• Push the movable knife holder to the right as far as
it will go.
• Turn the knob away from you until the knife clicks
into a horizontal position.
Note: If the knife stops in the up position;
*
Turn the hand wheel toward you until the
knife clears the top of the machine.
*
Continue to rotate the knife to the horizontal
position.
• Open looper cover and push the movable knife
holder to the right as far as it will go.
• Turn the knob up and toward you until the knife
clicks into the working position.
Movable Knife
Holder
Caution :
Be sure to turn off power switch.
Caution :
Always close looper cover before operating
machine.
To place movable knife in nonworking position
To place movable knife in working position