Singer 14T968 User Manual

A 1-needle 2-thread straight stitch is used
for construction or decorative stitching.
1-needle 2-thread stitch is used for
1-needle 2-thread stitch is used for
overedging common fabrics. It is also
1-needle 3-thread stitch is used for
overedging and seaming on common
1-needle 3-thread stitch is used for
butted or lapped seams and ornamental
2-needle 3-thread stitch that is ideal for
lightweight, extremely stretchy fabrics
such as tricot and spandex.
2-needle 4-thread stitch that is ideal
for medium to heavyweight stretchy
fabrics such as double knits and swim
1. SELECTION OF STITCHES & AUTO TENSION
Seams also can be sewn at desired
A 4 mm and 6 mm overlock seam width
ideal for flatlock (butted or lapped) seams
stitching with decorative thread. Also,
Mock Safety
Stretch Mock
This machine is capable of producing various types of stitches according to the combination of Auto Tension
Selected, needle positions, threading methods, and the use of convertible right looper/spreader.
Stitch Type Reference
Page
1. Double
Chain Stitch
39
distance from edge of fabric by
disengaging the right looper and movable
knife.
2. Two-thread
Wrapped Edge
Overlock
It is also ideal for rolled and blind hemming.
41
can be obtained by changing the needle
position.
3. Two-thread
Overedge
42
and blind hemming. A 4 mm and
6 mm overedge seam width can be
obtained by changing the needle position.
Overlock
43
fabrics. A 4mm and 6 mm overlock seam
width can be obtained by changing the
needle position.
5. Three-thread
Flatlock
44
a 4 mm and 6 mm flatlock width can
be obtained by changing the needle
position.
6. Three-thread
Ultra-Stretch
45
Stitch
7.Four-thread Ultra-
46
Safety Stitch
Wear.
4. Three-thread
seaming lightweight or stretch fabrics.
5
ATD : Auto Tension Dial Selected
ATD: D
ATD: E
ATD: B
ATD: F
ATD: G
ATD: A
ATD: A
ATD: G
ATD: D

Singer 14T968 Specifications

General

Brand	Singer
Model	14T968
Category	Sewing Machine
Language	English