Singer 14T968DC - Three-Thread Ultra-Stretch Mock Safety Stitch: Setting up

Needle:
ATD:
Auto Tension Dial
“G”
Left Cover Stitch
Needle “C”
Not Threaded
Middle Cover Stitch
Needle “D”
Not Threaded
Right Cover Stitch
Needle “E”
Not Threaded
Overedge Left
Needle “A” (Orange)
Threaded
Overedge Right
Needle “B” (Blue)
Threaded
Upper Looper
(Green)
Looper Engaged
and Not Threaded
Lower Looper
(Red)
Threaded
Chain Stitch Looper
(Brown)
Not Threaded
Upper Looper Clutch “L”
Upper Knife Engaged
Seam Guide Plate Not Installed
Use Knife Guide
Seam Width Dial “N”
Stitch Length Dial “2”
Presser Foot
Pressure
“N”
Differential Feed Dial “N”
Stitch Finger “N”
Spreader Engaged
Set at:
Three-Thread Ultra-Stretch Mock Safety Stitch page 2