Singer 3232 User Manual

43
Attaching the Presser Foot Shank
1
3
2
Raise the presser bar (a) with the presser foot lifter. Attach
the presser foot shank (b) as illustrated. (1)
Install the pin (d) of the presser foot (e) into the cut-out (c) of
the presser foot lifer. (2)
Push the pin (d) of the presser foot forward to separate. (3)
Attach the edge/quilting guide (f) in the slot as illustrated.
Adjust as needed for hems, pleats, quilting, etc. (4)
Turn power switch to off ("O") when carrying out any of
the above operations!
Attaching the presser foot
Removing the presser foot
Attaching the edge/quilting guide
Attention:
EN
4
e
c
f
a
b
a
c
d
e
b

Singer 3232 Specifications

General

Stitch Patterns	32
Buttonhole Style	1-Step
Built-in Needle Threader	Yes
Free Arm	Yes
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Automatic Bobbin Winding	Yes
Type	Mechanical
Stitch Width	5mm
Presser Feet	All-purpose, Zipper, Buttonhole, Button Sewing
Stitch Length	4mm
Maximum Sewing Speed	750 stitches per minute
Voltage	120V
Weight	12.3 lbs
Bobbin Type	Front Load