Singer 337 User Manual

28
To Remove and Replace Throat Plate
To remove the throat plate To replace the throat plate
CLAMPING PIN
/
• Raise needle bar and presser foot.
$ Open slide plate.
• Place thumb under right front end of
throat plate and raise until clamping pin
lifts up.
• Draw plate toward right to disengage.
/ , H
/
• Position fork of plate under clamping
pin as shown above.
• Push to left and press down until plate
snaps into position.
• Close slide plate.

Singer 337 Specifications

General

Brand	Singer
Model	337
Category	Sewing Machine
Language	English