1. Press the Sequence button to enter Sequence mode.
Activate Stitch Menu 4.
2. Pull out the Stitch Chart to see which stitch number that
refers to which letter/number.
To program “SINGER”, would be stitch number 029, 019,
024, 017, 015, 028 (A).
3. Select the stitch you will use. On the display, you can see
the selected stitch number and what position it has in the
sequence (B).
4. Select another stitch and it will appear as the next stitch in
the sequence.
5. Continue until your sequence is complete.
1. Press the Sequence button to enter Sequence mode. Stitch
Menu 4 is selected automatically.
2. Pull out the Stitch Chart to see which stitch number that
refers to which letter/number.
To program “SINGER”, would be stitch number 29, 19, 24,
17, 15, 28 (A).
3. Select the stitch you will use. On the display, you can see
the selected stitch number and what position it has in the
sequence (B).
4. Select another stitch and it will appear as the next stitch in
the sequence.
5. Continue until your sequence is complete.
You can step through the sequence with the navigation arrows.
The selected stitch number is highlighted on the display (C).
Edit a Sequence
Delete Button
To delete a stitch in the sequence, select the stitch with the
navigation arrows and press “Delete”. Press “Delete” and keep
it depressed for three seconds to delete the whole sequence.
To add another stitch to the sequence, go to the position where
to add the stitch. Enter the stitch number and the new stitch
will be added in succession.
Adjust a Stitch in the Sequence
Navigation Arrows
Use the navigation arrows to select the stitch to be adjusted.
Adjust the stitch width and stitch length using the + and —
buttons.
Sew Out a Sequence
Repeat Button
When you start sewing, the machine will sew one repetition of
your sequence, sew 3 tie-off stitches and then stop
automatically. Press the repeat button before starting to sew, to
repeatedly sew the sequence.
Operating Your Machine – 23
English
To Next Page
Loading...
Need help?
General
