Singer HD0405S User Manual

The excess fabric is trimmed and the hem is sewn
and the raw edges are overlocked in one operation.
The overlock blind hem is best suited for sewing
knit wear. It provides a durable finish that is almost
invisible.
Remove the left needle and adjust machine for a
narrow 3-thread overlock stitch.
Note: The three-thread flatlock stitch can also be
used.
Set the stitch length dial at 4.
Fold the hem to the wrong side of the fabric, then
back to the right side with 6mm (1/4”) beyond the
fold.
Stitch on the extended hem edge, allowing the
machine needle to barely catch the edge of the fold.
Remove
Remove
43
How to Sew an Overlock Blind Hem
Sew de corative pin tucks on the fabric before cutting
out the garment.
Remove
the left needle and adjust machine for a
narrow 3-thread overlock stitch.
Note:
The rolled hem stitch can also be used for
this technique.
Place the movable upper knife in the nonworking
position (page 25).
mark the fabric with the desired number of pin tucks
using a water soluble fabric marker.
How to Sew Pin Tucks

Singer HD0405S Specifications

General

Type	Overlock sewing machine
Control type	Rotary
Sewing speed	1300
Product color	Gray
Built-in light	Yes
Sewing machine functions	Overlock
AC input voltage	120 V
Power supply type	Electric
AC input frequency	60 Hz

Weight and Dimensions

Depth	355.6 mm
Width	279.4 mm
Height	292.1 mm