UTILITY STITCHES
19
Blind stitch
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder screw to place
the hem guide between the screw and the shank of foot holder.
Tighten the screw making sure the front wall of hem guide is placed
between the toes of the presser foot.
Raise the presser foot and place the fabric under the foot so that the
soft fold rests against the front wall of the hem guide.
Lower the foot, then stitch slowly for better for better control so that
the zigzag stitches fall on the hen allowance and pierce the soft fold.
While sewing, make sure the soft fold runs along the front wall of
the hem guide.
Spread the fabric flat with the right side facing up.
Stitch E is for hems on stretch
knit fabrics.
Stitch F is for hems on woven
(non-stretch) fabrics.
To Next Page
Loading...
Need help?
General
