PREPARATION FOR FLYING
Together with your dealer, your cross over Harness CULT XC will be adjusted and test-
ed. In particular – as mentioned below – a compatibility test must be performed during
the initial installation of the Rescue. The basic settings can be performed yourself while
sitting in the Harness simulator.
Assembly
skywalk recommends to carry out the assembly in the following order. In case of
doubt, you should always inquire at your skywalk dealer.
Connecting the lateral Hip Belt
The lateral Hip Belt must be connected with the carabiner during assembly. Before con-
nection, the lateral belt must be run through the small loop on the perpendicular belt,
this prevents the belt from riding up in the carabiner.
To Next Page
Loading...
Need help?
General
