SMC Networks ISE30A Series User Manual

-30-
No.PS※※-OML0003-J
■[F 2] Setting of OUT2
Set output method of OUT2.
The display colour is linked to the setting of OUT1, and can not be set for OUT2
<Operation>
Press the
or button in function selection mode to display [F 2].
Press the button Moves on to setting of output mode
Set [F 2] based on [F 1] setting of OUT1 (page 27 to 29)
∗: If there is only 1 output or the analogue output is used, the display indicates [---], and this function cannot be set.
■[F 3] Response time
Select the response time of the switch output.
Output chattering can be prevented by setting the response time.
<Operation>
Press the
or button in function selection mode to display [F 3].
Press the button. Move on to setting of response time.
Press the button to set. Return to function selection mode.
Setting of [F 3] Response time completed
Setting of response time
Press the
or
button to select response time.

SMC Networks ISE30A Series Specifications

General

Brand	SMC Networks
Model	ISE30A Series
Category	Switch
Language	English