SMC Networks ZSE20B User Manual

-39-
No.PS※※-OMU0006-A
■[F 5] FUNC terminal setting
When the product with analog output/auto shift input function is used, the FUNC terminal setting can be
selected.
Analog output: Outputs proportional output according to the applied pressure.
Auto-shift: The display indicates the change of relative flow from the reference value.
Auto-shift zero: The display is set to zero when the signal is input, and therefore the display indicates the
change of relative flow from the reference value.
Copy input: Copies the set value. Refer to "[F97] Selection of copy function" on page 56.
<Operation>
Press the or button in function selection mode to display [F 5].
Press the button. Move on to FUNC terminal setting.
[AoUt] (Analog
output) is
selected
Press the
button to set.
Return to
function
selection mode.
[ASin] (Auto-shift
input) is selected
Press the
button to set.
Move on to setting of
auto-shift function.
[CoPY] (Copy
input) is
selected
Press the
button to set.
Return to
function
selection mode.
Setting of auto-shift
function
Press the or
button to select the
auto-shift function.
Press the
button to set.
Move on to setting of
effective output.
FUNC terminal setting
Press the or button to select the FUNC terminal function.

SMC Networks ZSE20B Specifications

General

Brand	SMC Networks
Model	ZSE20B
Category	Switch
Language	English