-32-
No.PS※※-OML0003-J
■[F 5] Auto-preset function
When hysteresis mode is selected, the auto-preset function can calculate an optimum pressure value
automatically based on the on-going operation.
<Operation>
Press the
or button in function selection mode to display [F 5].
Press the button.
Move on to setting of auto-preset.
Press the button to set. Return to function selection mode.
Setting of [F 5] Auto-preset function completed
Press the
button during measurement mode to set the pressure.
Then press the
button again to change the pressure setting, while the display is flashing.
Press the
or
button to select auto-preset.